ɫɫÀ²

News

Invisible dirt detector tested out in Finnish hospital

The technique can be used in sectors ranging from healthcare to the food industry. In the future, it could also be used for detecting viruses
AutoDet. Kuva: Mikko Raskinen.
Sairaalatutkimuksessa hyperspektrikuvantaminen rajoitettiin näkyvän valon alueelle satojen värien sijaan. Kuva: Mikko Raskinen.

Aalto University researchers have developed a method that can detect dirt and bacteria that cannot be seen with the naked eye. The device combines artificial intelligence and a hyperspectral camera that can detect hundreds of different colours. The device, which they have named AutoDet (automatic biological contamination detection) is especially useful for healthcare during seasonal health outbreaks, or epidemics.

The team recently tested the device in the waiting areas of Satasairaala Hospital in Pori, in west Finland. The pilot study involved taking a total of 200 measurements from surfaces such as tables and chair armrests, focussing on flat surfaces.

‘We were able to detect the biofilms left by people coughing, which are difficult to detect with the naked eye. The study demonstrated that the device can alert the user of stains as they appear on surfaces,’ explains Aalto University Academy Research Fellow Juha Koivisto.

The device detects any dirt that is not part of the surface. The study found biological material sensitive to blue light that is referred to as a protein’s optical fingerprint. From this, it can be concluded that bacterial growth has formed or is forming on the table.

‘The advantage our system has over traditional methods is that our system is fully automatic. This makes the device cheaper to operate. It can also scan large areas, monitor them for 24 hours, and provide alerts when dirt is detected. The downside is that at the moment, the initial cost of the device is still high. However, mass production and tailoring of devices for specific applications should bring these costs down.’ Juha Koivisto explains

By changing the sensors of the device and the measurement technique used – so that it looks at smaller points instead of large areas – it could also be used to detect viruses.

‘At present, the artificial intelligence used and the device’s light wavelengths are suitable for detecting viruses as well. However, it takes longer to detect viruses and requires the examination of a saliva sample on a microscopic scale. We are currently searching funders and research partners for the virus detection project,’ says Juha Koivisto.

AutoDet received Business Finland funding for the commercialisation of the project, and the company CleanDet was established in November 2019 to carry the technology forward. Marianne Talvitie is the company’s managing director.

‘The technology is flexible, and it can be used in sectors such as the food industry, health care and travel, or in different housing services for the elderly – in short, anywhere where there is a need to restrict, for example, the spread of microbes,’ said Talvite.

CleanDet is working together with Kiilto to test the device for a variety of different applications.

‘The requirements for surface hygiene vary depending on the application area – for example, standards for medical instruments in hospitals are different compared to standards for coffee shop tables. I would venture to say, however, that after the current virus epidemic, there will be a general tightening of hygiene monitoring standards. This kind of device would enable us to assure that a surface is hygienic and respond to problems as quickly as possible,’ explains Ville Solja, Chief Business Development Officer at Kiilto.

Further information:

Research article: 

Juha Koivisto
Academy Research Fellow
Aalto University
juha.koivisto@aalto.fi
Tel. +358 50 441 9233

Marianne Talvitie
Managing Director
CleanDet
marianne.talvitie@cleandet.com
Tel. +358 40 900 4846

Ville Solja
Chief Business Development Officer
Kiilto
ville.solja@kiilto.com
Tel. +358 50 329 5211

Earlier news article: Bugs or dust? New method quickly reveals whether a surface is truly clean

  • Updated:
  • Published:
Share
URL copied!

Read more news

Smiling man in a hydraulics laboratory
Cooperation, Research & Art Published:

Mobile work machines are electrifying rapidly — a new research environment supports the industry’s product development

The LEMMI development and testing equipment for mobile work machines supports the electrification in the field and strengthens cooperation between academic research and industry.
Colourful grid of small squares on a wavy blue and brown abstract 3D background
Press releases Published:

Ability to harness quantum speed gains now within sight after researchers solve massive simulation problem in a heartbeat

The use of a quantum-inspired algorithm to calculate the unworkably vast potential properties of quantum materials is an early example of how quantum technology can be used to improve itself. The discovery could have future applications in dissipationless technology, for example to mitigate data centre heating.
Microscope image of raised A! logo and Finnish text with 20 µm scale bar at bottom left
Press releases Published:

Record-breaking photonics approach traps light on a chip for millions of cycles

With 'nanoscale surgery' the researchers were able to sculpt delicate van der Waals materials without destroying them, achieving record-breaking performance in the process.
Log2Motion simulation with a musculoskeletal model using a smartphone.
Press releases, Research & Art Published:

Tired of swiping? Now an AI simulation helps us understand why

Screen logging tells us where smart phone users tap and swipe, but now researchers have developed a musculoskeletal model that helps understand the physical effort that goes into these motions